Medina S, Olver AV, Dini D, The Influence of Surface Topography on Energy Dissipation and Compliance in Tangentially Loaded Elastic Contacts, JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2012, Vol:134, ISSN:0742-4787(publicationdoi)
Authors:Medina S, Olver AV, Dini D
Hills DA, Paynter RJH, Dini D, An overview of the quantification of fretting fatigue lives of complete contacts, ENGINEERING FRACTURE MECHANICS, 2012, Vol:80, Pages:3-12, ISSN:0013-7944(doi)
Authors:Hills DA, Paynter RJH, Dini D
Heyes DM, Smith ER, Dini D, et al, Pressure dependence of confined liquid behavior subjected to boundary-driven shear., J Chem Phys, 2012, Vol:136(doi)
Authors:Heyes DM, Smith ER, Dini D, Spikes HA, Zaki TA
Oldfield M, Dini D, Giordano G, et al, Detailed finite element modelling of deep needle insertions into a soft tissue phantom using a cohesive approach., Comput Methods Biomech Biomed Engin, 2012(doi)
Authors:Oldfield M, Dini D, Giordano G, Rodriguez Y Baena F
Scaraggi M, Carbone G, Dini D, Lubrication in soft rough contacts: A novel homogenized approach. Part II - Discussion, SOFT MATTER, 2011, Vol:7, Pages:10407-10416, ISSN:1744-683X(publicationdoi)
Authors:Scaraggi M, Carbone G, Dini D
Scaraggi M, Carbone G, Persson BNJ, et al, Lubrication in soft rough contacts: A novel homogenized approach. Part I - Theory, SOFT MATTER, 2011, Vol:7, Pages:10395-10406, ISSN:1744-683X(publicationdoi)
Authors:Scaraggi M, Carbone G, Persson BNJ, Dini D
Scaraggi M, Carbone G, Dini D, Experimental Evidence of Micro-EHL Lubrication in Rough Soft Contacts, TRIBOLOGY LETTERS, 2011, Vol:43, Pages:169-174, ISSN:1023-8883(publicationdoi)
Authors:Scaraggi M, Carbone G, Dini D
Heyes DM, Smith ER, Dini D, et al, The equivalence between volume averaging and method of planes definitions of the pressure tensor at a plane, JOURNAL OF CHEMICAL PHYSICS, 2011, Vol:135, ISSN:0021-9606(doi)
Authors:Heyes DM, Smith ER, Dini D, Zaki TA
Balcombe R, Fowell MT, Olver AV, et al, A coupled approach for rolling contact fatigue cracks in the hydrodynamic lubrication regime: The importance of fluid/solid interactions, WEAR, 2011, Vol:271, Pages:720-733, ISSN:0043-1648(doi)
Authors:Balcombe R, Fowell MT, Olver AV, Ioannides S, Dini D
Heyes DM, Smith ER, Dini D, et al, The equivalence between volume averaging and method of planes definitions of the pressure tensor at a plane., J Chem Phys, 2011, Vol:135(doi)
Authors:Heyes DM, Smith ER, Dini D, Zaki TA
Hills DA, Dini D, Characteristics of the process zone at sharp notch roots, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2011, Vol:48, Pages:2177-2183, ISSN:0020-7683(doi)
Authors:Hills DA, Dini D
Reina S, Dini D, Hills DA, et al, A quadratic programming formulation for the solution of layered elastic contact problems: Example applications and experimental validation, EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2011, Vol:30, Pages:236-247, ISSN:0997-7538(publicationdoi)
Authors:Reina S, Dini D, Hills DA, Iida Y
Accardi MA, Dini D, Cann PM, Experimental and numerical investigation of the behaviour of articular cartilage under shear loading-Interstitial fluid pressurisation and lubrication mechanisms, TRIBOLOGY INTERNATIONAL, 2011, Vol:44, Pages:565-578, ISSN:0301-679X(publicationdoi)
Authors:Accardi MA, Dini D, Cann PM
Reina S, Hills DA, Dini D, Incipient slip conditions in the rolling contact of tyred wheels, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2010, Vol:224, Pages:2049-2054, ISSN:0954-4062(doi)
Authors:Reina S, Hills DA, Dini D
Giacopini M, Fowell MT, Dini D, et al, A Mass-Conserving Complementarity Formulation to Study Lubricant Films in the Presence of Cavitation, JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2010, Vol:132, ISSN:0742-4787(doi)
Authors:Giacopini M, Fowell MT, Dini D, Strozzi A
Reina S, Hills DA, Dini D, Contact of a rigid cylinder indenting an elastic layer sliding over a rigid substrate, EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2010, Vol:29, Pages:772-783, ISSN:0997-7538(doi)
Authors:Reina S, Hills DA, Dini D
Reina S, Dini D, Hills DA, Interfacial slip and creep in rolling contact incorporating a cylinder with an elastic layer, EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2010, Vol:29, Pages:761-771, ISSN:0997-7538(doi)
Authors:Reina S, Dini D, Hills DA
Reina S, Paynter RJH, Hills DA, et al, Determining the coefficient of friction between solids without sliding, WEAR, 2010, Vol:269, Pages:339-343, ISSN:0043-1648(doi)
Authors:Reina S, Paynter RJH, Hills DA, Dini D
Paynter RJH, Hills DA, Dini D, Separation and slip at the edge of a complete contact: An asymptotic solution, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2010, Vol:47, Pages:2613-2619, ISSN:0020-7683(doi)
Authors:Paynter RJH, Hills DA, Dini D
Banerjee N, Hills DA, Dini D, The derivation and application of a semi-infinite flat and rounded asymptotic frictionless contact, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2009, Vol:51, Pages:662-666, ISSN:0020-7403(publicationdoi)
Authors:Banerjee N, Hills DA, Dini D
Qiu H, Hills DA, Dini D, An investigation of convection effects in complete and almost complete contact problems, EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2009, Vol:28, Pages:680-687, ISSN:0997-7538(publicationdoi)
Authors:Qiu H, Hills DA, Dini D
Dini D, Hills DA, Frictional Energy Dissipation in a Rough Hertzian Contact, JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2009, Vol:131, ISSN:0742-4787(publicationdoi)
Authors:Dini D, Hills DA
Dini D, Song X, Zhang SY, et al, Residual strain analysis in polycrystalline aggregates using diffraction measurement and finite element modelling, JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2009, Vol:44, Pages:55-70, ISSN:0309-3247(publicationdoi)
Authors:Dini D, Song X, Zhang SY, Korsunsky AM
Banerjee N, Dini D, Hills DA, Frictional complete contacts subject to shear and bulk tension, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2008, Vol:222, Pages:2301-2309, ISSN:0954-4062(publicationdoi)
Authors:Banerjee N, Dini D, Hills DA
Qiu H, Dini D, Hills DA, Torsional contact of an elastic flat-ended cylinder, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2008, Vol:56, Pages:3352-3362, ISSN:0022-5096(publicationdoi)
Authors:Qiu H, Dini D, Hills DA
Dini D, Sackfield A, Hills DA, An axi-symmetric Hertzian Contact subject to cyclic shear and severe wear, WEAR, 2008, Vol:265, Pages:1918-1922, ISSN:0043-1648(publicationdoi)
Authors:Dini D, Sackfield A, Hills DA
Dini D, Barber JR, Churchman CM, et al, The application of asymptotic solutions to contact problems characterised by logarithmic singularities, EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2008, Vol:27, Pages:847-858, ISSN:0997-7538(publicationdoi)
Authors:Dini D, Barber JR, Churchman CM, Sackfield A, Hills DA
Qiu H, Hills DA, Dini D, Further consideration of closure at the root of a sharp notch, JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2008, Vol:43, Pages:405-409, ISSN:0309-3247(publicationdoi)
Authors:Qiu H, Hills DA, Dini D
Qiu H, Paynter RJH, Dini D, et al, The state of stress induced by ring dislocations in a semi-infinite stepped shaft, EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2008, Vol:27, Pages:269-284, ISSN:0997-7538(publicationdoi)
Authors:Qiu H, Paynter RJH, Dini D, Hills DA
Qiu H, Hills DA, Nowell D, et al, Skew sliding of an elastic cylinder: An investigation of convection in contact, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2008, Vol:50, Pages:293-298, ISSN:0020-7403(publicationdoi)
Authors:Qiu H, Hills DA, Nowell D, Dini D
Olver AV, Dini D, Roughness in lubricated rolling contact: the dry contact limit, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2007, Vol:221, Pages:787-791, ISSN:1350-6501(publicationdoi)
Authors:Olver AV, Dini D
Qiu H, Hills DA, Dini D, The influence function for self-equilibrating forces on a semi-infinite wedge, JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2007, Vol:42, Pages:351-359, ISSN:0309-3247(publicationdoi)
Authors:Qiu H, Hills DA, Dini D
Karuppanan S, Dini D, Hills DA, Fretting fatigue test analysis of contact, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2007, Vol:30, Pages:499-509, ISSN:8756-758X(publicationdoi)
Authors:Karuppanan S, Dini D, Hills DA
Sackfield A, Dini D, Hills DA, Contact of a rotating wheel with a flat, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2007, Vol:44, Pages:3304-3316, ISSN:0020-7683(publicationdoi)
Authors:Sackfield A, Dini D, Hills DA
Duo P, Liu J, Dini D, et al, Evaluation and analysis of residual stresses due to foreign object damage, MECHANICS OF MATERIALS, 2007, Vol:39, Pages:199-211, ISSN:0167-6636(publicationdoi)
Authors:Duo P, Liu J, Dini D, Golshan M, Korsunsky AM
Vorster WJJ, Zhang SY, Golshan M, et al, Comparison of X-ray diffraction measurement of residual elastic strains: monochromatic beam and image plate versus white beam energy-dispersive analysis, JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2007, Vol:42, Pages:23-37, ISSN:0309-3247(publicationdoi)
Authors:Vorster WJJ, Zhang SY, Golshan M, Laundy D, Dini D, Korsunsky AM
Sackfield A, Dini D, Hills DA, The contact problem for a wheel having a 'flat', WEAR, 2006, Vol:261, Pages:1265-1270, ISSN:0043-1648(publicationdoi)
Authors:Sackfield A, Dini D, Hills DA
Churchman CM, Dini D, Hills DA, Closure at the root of a sharp notch, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2006, Vol:48, Pages:1063-1071, ISSN:0020-7403(publicationdoi)
Authors:Churchman CM, Dini D, Hills DA
Korsunsky AM, Liu J, Golshan M, et al, Measurement of residual elastic strains in a titanium alloy using high energy synchrotron X-ray diffraction, EXPERIMENTAL MECHANICS, 2006, Vol:46, Pages:519-529, ISSN:0014-4851(publicationdoi)
Authors:Korsunsky AM, Liu J, Golshan M, Dini D, Zhang SY, Vorster WJ
Korsunsky AM, Vorster WJJ, Zhang SY, et al, The principle of strain reconstruction tomography: Determination of quench strain distribution from diffraction measurements, ACTA MATERIALIA, 2006, Vol:54, Pages:2101-2108, ISSN:1359-6454(publicationdoi)
Authors:Korsunsky AM, Vorster WJJ, Zhang SY, Dini D, Latham D, Golshan M, Liu J, Kyriakoglou Y, Walsh MJ
Dini D, Hills DA, When does a notch behave like a crack?, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2006, Vol:220, Pages:27-43, ISSN:0954-4062(publicationdoi)
Authors:Dini D, Hills DA
Ciavarella M, Dini D, A refined CLNA model in fretting fatigue using asymptotic characterization of the contact stress fields, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2005, Vol:28, Pages:1099-1112, ISSN:8756-758X(publicationdoi)
Authors:Ciavarella M, Dini D
Sackfield A, Dini D, Hills DA, The tilted shallow wedge problem, EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2005, Vol:24, Pages:919-928, ISSN:0997-7538(publicationdoi)
Authors:Sackfield A, Dini D, Hills DA
Dini D, Nowell D, Korsunsky AM, Size and scale effects in fretting fatigue thresholds, INTERNATIONAL JOURNAL OF FRACTURE, 2005, Vol:135, Pages:L11-L18, ISSN:0376-9429(publicationdoi)
Authors:Dini D, Nowell D, Korsunsky AM
Sackfield A, Dini D, Hills DA, The finite and semi-infinite tilted, flat but rounded punch, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2005, Vol:42, Pages:4988-5009, ISSN:0020-7683(publicationdoi)
Authors:Sackfield A, Dini D, Hills DA
Dini D, Sackfield A, Hills DA, Comprehensive bounded asymptotic solutions for incomplete contacts in partial slip, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2005, Vol:53, Pages:437-454, ISSN:0022-5096(publicationdoi)
Authors:Dini D, Sackfield A, Hills DA
Dini D, Hills DA, Asymptotic characterisation of nearly-sharp notch root stress fields, INTERNATIONAL JOURNAL OF FRACTURE, 2004, Vol:130, Pages:651-666, ISSN:0376-9429(publicationdoi)
Authors:Dini D, Hills DA
Dini D, Hills DA, Bounded asymptotic solutions for incomplete contacts in partial slip, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2004, Vol:41, Pages:7049-7062, ISSN:0020-7683(publicationdoi)
Authors:Dini D, Hills DA
Hills DA, Dini D, Magadu A, et al, A review of asymptotic procedures in stress analysis: known solutions and their applications, JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2004, Vol:39, Pages:553-568, ISSN:0309-3247(publicationdoi)
Authors:Hills DA, Dini D, Magadu A, Korsunsky AM
Dini D, Nowell D, Flat and rounded fretting contact problems incorporating elastic layers, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2004, Vol:46, Pages:1635-1657, ISSN:0020-7403(publicationdoi)
Authors:Dini D, Nowell D
Hills DA, Dini D, What level of friction guarantees adhesion in a complete contact?, JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2004, Vol:39, Pages:549-551, ISSN:0309-3247(publicationdoi)
Authors:Hills DA, Dini D
Dini D, Hills DA, A consideration of the effects of the slip displacement on fretting fatigue behaviour, JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2004, Vol:39, Pages:397-407, ISSN:0309-3247(publicationdoi)
Authors:Dini D, Hills DA
Dini D, Hills DA, The effect of a crack-tip radius on the validity of the singular solution, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2004, Vol:218, Pages:693-701, ISSN:0954-4062(publicationdoi)
Authors:Dini D, Hills DA
Dini D, Hills DA, Unsymmetrical shear loading and its influence on the frictional shakedown of incomplete contacts, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2004, Vol:218, Pages:469-475, ISSN:0954-4062(publicationdoi)
Authors:Dini D, Hills DA
Dini D, Churchman C, Rajasekaran R, et al, A correlation of the process zone properties in complete, incomplete and almost complete fretting contacts, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2004, Vol:46, Pages:491-508, ISSN:0020-7403(publicationdoi)
Authors:Dini D, Churchman C, Rajasekaran R, Hills DA
Dini D, Hills DA, A method based on asymptotics for the refined solution of almost complete partial slip contact problems, EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2003, Vol:22, Pages:851-859, ISSN:0997-7538(publicationdoi)
Authors:Dini D, Hills DA
Nowell D, Dini D, Duo P, Stress analysis of V-notches with and without cracks, with application to foreign object damage, JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2003, Vol:38, Pages:429-441, ISSN:0309-3247(publicationdoi)
Authors:Nowell D, Dini D, Duo P
Dini D, Nowell D, Prediction of the slip zone friction coefficient in flat and rounded contact, WEAR, 2003, Vol:254, Pages:364-369, ISSN:0043-1648(publicationdoi)
Authors:Dini D, Nowell D
Nowell D, Dini D, Stress gradient effects in fretting fatigue, TRIBOLOGY INTERNATIONAL, 2003, Vol:36, Pages:71-78, ISSN:0301-679X(publicationdoi)
Authors:Nowell D, Dini D
Chapters
Korsunsky AM, Dini D, Walsh MJ, Prediction of Fatigue Crack Growth Rates in Ti-6Al-4V Alloy, ln:Multiscale Fatigue Crack Initiation and Propagation of Engineering Materials: Structural Integrity and Microstructural Worthiness, Editor(s): SIh, Netherlands, Springer, 2008, Pages: 47-64, ISBN:978-1-4020-8519-2(publicationdoi)
Authors:Korsunsky AM, Dini D, Walsh MJ
Conference
Oldfield M, Dini D, Rodriguez Y Baena F, Detailed finite element simulations of probe insertion into solid elastic material using a cohesive zone approach., 2010, Pages:3198-3201, ISSN:1557-170X(doi)
Authors:Oldfield M, Dini D, Rodriguez Y Baena F
Medina S, Dini D, Olver AV, ADHESIVE CONTACT BETWEEN ATOMISTIC SURFACES USING A CONTINUUM ANALYSIS, ASME/STLE International Joint Tribology Conference, AMER SOC MECHANICAL ENGINEERS, 2010, Pages:35-37
Authors:Medina S, Dini D, Olver AV
Balcombe R, Fowell MT, Olver AV, et al, A COUPLED APPROACH FOR MODELLING ROLLING CONTACT FATIGUE CRACKS UNDER ELASTOHYDRODYANMIC LUBRICATION, ASME/STLE International Joint Tribology Conference, AMER SOC MECHANICAL ENGINEERS, 2010, Pages:269-271
Authors:Balcombe R, Fowell MT, Olver AV, Dini D
Reina S, Dini D, FRICTIONAL SHAKEDOWN IN CONTACT PROBLEMS OF LAYERED SYSTEMS, ASME/STLE International Joint Tribology Conference, AMER SOC MECHANICAL ENGINEERS, 2010, Pages:387-389
Authors:Reina S, Dini D
Zografos A, Dini D, AN INDIRECT BOUNDARY ELEMENT FORMULATION FOR THE SOLUTION OF COUPLED 2D CONTACT PROBLEMS, ASME/STLE International Joint Tribology Conference, AMER SOC MECHANICAL ENGINEERS, 2010, Pages:367-369(publication)
Authors:Zografos A, Dini D
Balcombe R, Fowell MT, Dini D, Modelling rolling contact fatigue cracks in the hydrodynamic lubrication regime: a coupled approach, Mesomechanics 2009 Conference, ELSEVIER SCIENCE BV, 2009, Pages:245-248, ISSN:1877-7058(publicationdoi)
Authors:Balcombe R, Fowell MT, Dini D
Zografos A, Dini D, A combined BEM/Contact Asymptotics (BEM-CA) semi-analytical formulation for the assessment of fretting damage in bolted joints, Mesomechanics 2009 Conference, ELSEVIER SCIENCE BV, 2009, Pages:201-204, ISSN:1877-7058(publicationdoi)
Authors:Zografos A, Dini D
Reina S, Dini D, Hills DA, On the accurate prediction of interfacial micro-slip in frictional joints using distributed dislocations and quadratic programming techniques, Mesomechanics 2009 Conference, ELSEVIER SCIENCE BV, 2009, Pages:181-184, ISSN:1877-7058(publicationdoi)
Authors:Reina S, Dini D, Hills DA
Sih GC, Korsunsky AM, Dini D, Mesomechanics 2009 Foreword: Dissipation and damage across multiple scales in physical and mechanical systems, Mesomechanics 2009 Conference, ELSEVIER SCIENCE BV, 2009, Pages:1-3, ISSN:1877-7058(publicationdoi)
Authors:Sih GC, Korsunsky AM, Dini D
Zografos A, Dini D, Olver AV, Fretting fatigue and wear in bolted connections: A multi-level formulation for the computation of local contact stresses, 35th Leeds-Lyon Symposium on Tribology, ELSEVIER SCI LTD, 2009, Pages:1663-1675, ISSN:0301-679X(publicationdoi)
Authors:Zografos A, Dini D, Olver AV
Korsunsky AM, Song X, Belnoue J, et al, Crack tip deformation fields and fatigue crack growth rates in Ti-6Al-4V, 7th International Conference on Fatigue Damage in Structural Materials, ELSEVIER SCI LTD, 2009, Pages:1771-1779, ISSN:0142-1123(publicationdoi)
Authors:Korsunsky AM, Song X, Belnoue J, Jun T, Hofmann F, De Matos PFP, Nowell D, Dini D, Aparicio-Blanco O, Walsh MJ
Reina S, Dini D, INCIPIENT SLIP AND FRICTIONAL CREEP OF TYRED SYSTEMS, STLE/ASME 2008 International Joint Tribology Conference, AMER SOC MECHANICAL ENGINEERS, 2009, Pages:613-615(publication)
Authors:Reina S, Dini D
Medina S, Dini D, Olver AV, et al, FAST COMPUTATION OF FRICTIONAL ENERGY DISSIPATION IN ROUGH CONTACTS UNDER PARTIAL SLIP, STLE/ASME 2008 International Joint Tribology Conference, AMER SOC MECHANICAL ENGINEERS, 2009, Pages:573-575(publication)
Authors:Medina S, Dini D, Olver AV, Hills DA
Accardi MA, Dini D, MODELLING OF THE MECHANICAL BEHAVIOUR OF HUMAN JOINTS CARTILAGE, STLE/ASME 2008 International Joint Tribology Conference, AMER SOC MECHANICAL ENGINEERS, 2009, Pages:147-149(publication)
Authors:Accardi MA, Dini D
Korsunsky AM, Dini D, Walsh MJ, Fatigue crack growth rate analysis in a titanium alloy, 7th International Conference on Fracture and Damage Mechanics, TRANS TECH PUBLICATIONS LTD, 2008, Pages:5-8, ISSN:1013-9826(publication)
Authors:Korsunsky AM, Dini D, Walsh MJ
Song X, Zhang SY, Dini D, et al, Finite element modelling and diffraction measurement of elastic strains during tensile deformation of HCP polycrystals, Symposium on Frontiers in Computational Materials Science, ELSEVIER SCIENCE BV, 2008, Pages:131-137, ISSN:0927-0256(publicationdoi)
Authors:Song X, Zhang SY, Dini D, Korsunsky AM
Dini D, Between continuum and atomistic contact mechanics: Could we bridge the gap?, ASME/STLE International Joint Tribology Conference, 2008, Pages:625-627
Authors:Dini D
Song X, Zhang SY, Dini D, et al, Inter-granular residual stresses in polycrystalline aggregates: finite element modelling and diffraction post-processing, MECASENS 4th International Conference on Stress Evaluation using Neutrons and Synchrotron Radiation, TRANS TECH PUBLICATIONS LTD, 2008, Pages:271-276, ISSN:0255-5476(publication)
Authors:Song X, Zhang SY, Dini D, Korsunsky AM
Korsunsky AM, Dini D, Dunne FPE, et al, Comparative assessment of dissipated energy and other fatigue criteria, 6th International Conference on Fatique Damage of Structural Materials, 2007, Pages:1990-1995(publication)
Authors:Korsunsky AM, Dini D, Dunne FPE, Walsh MJ
Korsunsky AM, Song X, Belnoue J, et al, Modeling crack initiation and propagation in nickel base superalloys, 6th International Conference on Fracture and Damage Mechanics, TRANS TECH PUBLICATIONS LTD, 2007, Pages:53-56, ISSN:1013-9826(publication)
Authors:Korsunsky AM, Song X, Belnoue J, Prakash LDG, Dini D, Walsh MJ
Hills DA, Dini D, A new method for the quantification of nucleation of fretting fatigue cracks using asymptotic contact solutions, 4th International Symposium on Fretting Fatique, 2006, Pages:1114-1122
Authors:Hills DA, Dini D
Dini D, Nowell D, Dyson IN, The use of notch and short crack approaches to fretting fatigue threshold prediction: Theory and experimental validation, 4th International Symposium on Fretting Fatique, 2006, Pages:1158-1165
Authors:Dini D, Nowell D, Dyson IN
Dini D, Korsunsky AM, Dunne FPE, Diffraction post-processor for polycrystalline plasticity modelling, 7th European Conference on Residual Stresses (ECRS 7), 2006, Pages:427-432
Authors:Dini D, Korsunsky AM, Dunne FPE
Dini,D. , Kim,K. , Nowell,D. , et al, Multi-layer coatings for the enhancement of fretting fatigue performance, 16th AeroMat Advanced Aerospace Materials & Processes Conference and Exposition, AeroMat 2005, Orlando, Florida, 6 - 9 June 2005, USA, ASM, 2006
Korsunsky AM, Zhang SY, Dini D, et al, Oxford HEXameter: Laboratory high energy X-ray diffractometer for bulk residual stress analysis, 7th European Conference on Residual Stresses (ERCS 7), 2006, Pages:743-748
Authors:Korsunsky AM, Zhang SY, Dini D, Vorster WJJ, Liu J
Nowell D, Dini D, Hills DA, Recent developments in the understanding of fretting fatigue, 15th European Conference on Fracture, 2006, Pages:207-222
Authors:Nowell D, Dini D, Hills DA
Golshan M, Liu J, Kim K, et al, Analysis of plastic deformation and residual elastic strain in a titanium alloy using synchrotron x-ray diffraction, 7th Biennial Conference on High Resolution X-Ray Diffraction and Imaging, 2005, Pages:A195-A199
Authors:Golshan M, Liu J, Kim K, Laundy D, Dini D, Korsunsky AM
Hills,D.A. , Churchman,C.M. , Dini,D. , Asymptotic methods applied to the correlation of fretting fatigue lives (Article no.WTC2005-63995), Proceedings of the World Tribology Congress III, 12 - 16 September 2005, Washington, D.C., USA, ASME, 2005
Authors:Hills,D.A. , Churchman,C.M. , Dini,D.
Dini,D. , Nowell,D. , Dyson,I.N. , et al, Fretting fatigue of Ti/6Al/4V: experiments and analysis, NATO RTO High Cycle Fatigue Symposium, NATO, 2005
Dini,D. , Nowell,D. , Korsunsky,A.M. , Size and scale effects in fretting fatigue thresholds, 11th International Conference on Fracture, 20 - 25 March, Turin, Italy, CCI Centro Congressi Internazionale, 2005, Pages:1-6
Authors:Dini,D. , Nowell,D. , Korsunsky,A.M.
Dini,D. , Hills,D.A. , A new method for the quantification of nucleation of fretting fatigue cracks, 4th International Symposium on Fretting Fatigue (ISFF4), 26 - 28 May 2004, Lyon, France, 2004
Authors:Dini,D. , Hills,D.A.
Dini,D. , Churchman,C.M. , Hills,D.A. , A re-evaluation of incomplete fretting fatigue experimental data using the concept of asymptotes (Article no.72), 12th International Conference on Experimental Mechanics, 29 August - 2 September 2004, Bari, Italy, McGraw-Hill, 2004, Pages:1-6
Authors:Dini,D. , Churchman,C.M. , Hills,D.A.
Dini,D. , Nowell,D. , Dyson,I.N. , Experimental validation of a short crack approach for fretting fatigue threshold prediction (Article no.363), 12th International Conference on Experimental Mechanics, 29 August - 2 September 2004, Bari, Italy, McGraw-Hill, 2004, Pages:1-6
Authors:Dini,D. , Nowell,D. , Dyson,I.N.
Dini,D. , Hills,D.A. , The use of asymptotic solution in fretting fatigue (Article no.ECF15), 15th European Conference of advanced Fracture mechanics for life and safety assessments (ECF15), 11 - 13 August 2004, Stockholm, Sweden, ESIS, 2004, Pages:1-8(publication)
Authors:Dini,D. , Hills,D.A.
Ciavarella,M. , Dini,D. , Demelio,G.P. , A critical assessment of damage parameters for fretting fatigue, 3rd Symposium on fretting fatigue: advances in the basic understanding and applications, Nagaoka, Japan, ASTM, 2003, Pages:108-117
Authors:Ciavarella,M. , Dini,D. , Demelio,G.P.
Dini,D. , Hills,D.A. , An asymptotic approach for the correlation of complete, incomplete and almost complete fretting contacts (Article no.242, Keynote), International Conference on Computational & Experimental Engineering and Sciences, 25 - 29 July 2003, Corfu, Greece, Tech Science Press, 2003, Pages:1-6
Authors:Dini,D. , Hills,D.A.
Dini,D. , Nowell,D. , Application of short crack arrest concepts to the prediction of thresholds in fretting fatigue (Article no.139), International Conference on Computational & Experimental Engineering and Sciences, 25 - 29 July 2003, Corfu, Greece, Tech Science Press, 2003, Pages:1-6
Authors:Dini,D. , Nowell,D.
Dini,D. , Hills,D.A. , The role of asymptotic analysis in quantifying the process zone in notches and cracks (Invited lecture), XX Encuentro del grupo espaol De Fractura, 2 - 4 April 2003, Benicassin, Spain, 2003, ISSN:0213-3725
Authors:Dini,D. , Hills,D.A.
Dini,D. , Ciavarella,M. , Demelio,G. , Fretting fatigue, surface damage or fatigue phenomenon?, 10th International Conference on Fracture, December 2001, Honolulu, Oxford, Pergamon, 2001
Authors:Dini,D. , Ciavarella,M. , Demelio,G.
Dini,D. , Ciavarella,M. , Demelio,G. , On fretting fatigue damage parameters, 6th International Conference on Biaxial/Multiaxial Fatigue and Fracture, 25 - 28 June 2001, Lisbon, Portugal, 2001
Authors:Dini,D. , Ciavarella,M. , Demelio,G.
Nowell, D. , Dini, D. , Explaining the size effect in fretting fatigue: short crack arrest and bounded asymptotic approaches, Fatigue 2006
Authors:Nowell, D. , Dini, D.
Hills, D.A. , Churchman, C.M. , Dini, D. , Fretting fatigue: The equivalence of critical plane and critical asymptotic solutions, 15th U.S. National Congress on Theoretical and Applied Mechanics
Authors:Hills, D.A. , Churchman, C.M. , Dini, D.
Dini, D. , Hills, D.A. , Frictional Energy Dissipation In A Rough Hertzian Contact (MCMAT2007-30565), ASME Applied Mechanics and Materials Conference
Authors:Dini, D. , Hills, D.A.
Dini, D. , Hills, D.A. , On the nature of singularities and asymptotic fields in contact mechanics, IJTC2006, STLE/ASME International Joint Tribology Conference
Authors:Dini, D. , Hills, D.A.
Dini, D. , Regino, G.M. , Dunne, F.P.E. , et al, Polycrystal Deformation: Modelling And Diffraction Measurements For The Development Of Microscopic Energy-Based Fatigue Prediction Criteria, Mesomechanics 2006 (8th Mesomechanics Conference)
